Free
$0/monthNo card needed · A tune = one project you upload- 3 tunes a month
- The full per-plate report
- Tuned for your printer and spools
Beta full · waitlist open
Get every plate right.
Upload a Bambu Studio project. Plateright reads every plate and tells you what to change on each one, and why.
3 free tunes a month a tune = one project you upload no card
- File
- Sample_Plaque_and_Chain.3mf
- Printer
- P1S · 0.4 mm · 2 spools
- Goal
- Balanced · layer height kept
- 01Moving jointsElephant foot comp.default→0.15 mm
- 02SeamSeam positiondefault→backScarf seamdefault→external
- 03Small detailsSmall perimeter speeddefault→25 mm/s
- Plates
- 02
- Changes
- 15
- Read in
- 0.3 s
14Bambu Lab models, A1 mini to H2C
250MBper project, multi-plate and painted
30daysthen your upload is deleted
0supports switched on behind your back
Sample report
Every change, and why.
The real report of a two-plate test project on a P1S. Nothing staged: this is what you get back.
- Your file, as saved
- Tuned by Plateright
Applied to every plate
Outer wall accel.5000 mm/s²→4000 mm/s²
Min layer time4 s→8 s
Sample_Plaque_and_Chain.3mfBalanced
Plate 01 · 6 changesLettersFlat plaque / relief
Outer wall speedSlower outer path for a smoother visible surfaceouter_wall_speeddefault→150 mm/s
Small perimeter speedSlows tiny loops so they don't melt into blobssmall_perimeter_speeddefault→25 mm/s
Detect thin wallsFills hairline walls instead of leaving gapsdetect_thin_walldefault→1
Wall generatorVariable-width walls that fit thin featureswall_generatordefault→arachne
IroningExtra pass that smooths flat top surfacesironing_typedefault→top
Seam positionWhere the start/end line sits on the partseam_positiondefault→aligned
- Slower outer wall = smoother visible surface and cleaner edges.
- Small loops (arrows, eyes, claws, joints) overheat at speed: 25 mm/s fixed.
- 17% of layers are mostly features narrower than 2 lines.
- Variable-width walls fill thin features instead of gaps.
- Large flat top surface: ironing makes it smooth.
- Straight-walled part: keep the seam in one line.
- Fix before printingText or line details here are thinner than about 2 nozzle widths (0.8 mm) on 17% of layers, so they print as blobs. Thicken the strokes to at least 0.8 mm in the model, switch to a 0.2 mm nozzle, or use finer layers for the top.
- Minor overhangs (0.7% of surface) - probably fine unsupported; check Preview for red areas.
Plate 02 · 7 changesDragonPrint-in-place (moving joints) · 5 joints
Outer wall speedSlower outer path for a smoother visible surfaceouter_wall_speeddefault→150 mm/s
Small perimeter speedSlows tiny loops so they don't melt into blobssmall_perimeter_speeddefault→25 mm/s
Detect thin wallsFills hairline walls instead of leaving gapsdetect_thin_walldefault→1
IroningExtra pass that smooths flat top surfacesironing_typedefault→no ironing
Seam positionWhere the start/end line sits on the partseam_positiondefault→back
Scarf seamBlends the join line so it looks less like a zipperseam_slope_typedefault→external
Elephant foot comp.Pulls in the first layer so the bottom edge doesn't flare outelefant_foot_compensationdefault→0.15 mm
- Slower outer wall = smoother visible surface and cleaner edges.
- Small loops (arrows, eyes, claws, joints) overheat at speed: 25 mm/s fixed.
- 12% of layers are mostly features narrower than 2 lines.
- Curved tops: ironing adds time with no benefit.
- Hide the seam on the back of the model.
- Scarf seam blends the seam on curved outer walls.
- Keeps first-layer joints from fusing.
- Check in Preview12% of the surface overhangs >45 deg, but supports inside joints fuse them. Supports left alone - paint support only where needed.
- Check in Preview33% of layers have tiny islands (<12 mm^2) - this is where heat blobs happen. The layer-time floor targets this.
How it works
Three steps. No slicer plugins.
- 01Drop your projectThe .3mf you saved in Bambu Studio. Every plate, every object, your printer and spools..3mf · up to 250 MB
- 02Read the reportEach plate gets its own changes, and every change says why, in plain words.per plate · per object
- 03Print it rightApply the changes in Bambu Studio, or with Pro download the tuned 3MF and re-slice.no plugins · no firmware
What it fixes
Rules learned from real prints.
Balanced, the default, never touches your layer height. Supports are never switched on for you, only flagged. How to fix each one in Bambu Studio
ProblemWhy it happensSettingChange
01Heat blobsTiny layers finish before they cool: eyes, claws and small letters melt.slow_down_layer_time4 s→8 s
03SeamsA zipper down the front of curved, organic shapes.seam_position · seam_slope_typedefault→back · scarf
04Fused jointsFirst-layer squish welds print-in-place hinges shut.elefant_foot_compensationdefault→0.15 mm
Pricing
Free to try. Pro when you print a lot.
ProComing soon
$60/year$5 a month, billed yearlySample_Plaque_and_Chain_balanced_P1S_0.4.3mf3MF
- Download the tuned 3MF
- Print time estimates, before and after
- Unlimited tunes
- Everything in Free
Questions
Before you upload.
What is Plateright?
A web app for Bambu Lab printer owners. Upload a Bambu Studio project (.3mf) and it tells you what to change on every plate and every object, and why: heat blobs, ghosting, seams, fused print-in-place joints, rough flat tops and thin text. Pro also hands back the tuned 3MF, ready to slice.
Which printers and slicers does it work with?
Bambu Studio projects for all 14 Bambu Lab printers, from the A1 mini to the H2C. OrcaSlicer, PrusaSlicer and other printer brands aren't supported yet.
Will it change my layer height or turn on supports?
Balanced, the default, never changes your layer height. Quality uses finer layers only where they help. Supports are never switched on automatically; overhangs are flagged so you decide in Bambu Studio's Preview.
Do I need a plugin or a firmware change?
No. It runs in your browser and installs as an app on iPhone and Android. You apply the changes in Bambu Studio by hand, or with Pro you download the tuned 3MF and re-slice.
Is my model private?
Yes. Files are private to your account, uploads are deleted after 30 days and results after 90, and your models are never used to train anything.
How much does it cost?
Free covers 3 projects a month with the full report. Pro is $7 a month or $60 a year for the tuned 3MF download, before-and-after print times and unlimited projects; Pro checkout opens soon.
Drop in your next project.
Join the waitlist- Private to your account
- Uploads deleted after 30 days
- Results after 90 days
- Never used to train anything